33
terminals with a steel brush or sand paper.
·After rubbing off the corrosive powder, connect the electric wires back to the terminals, and apply a thin
layer of margarine to the terminals.
Caution:
·When dismantling the electric wires from the terminals, you must turn off the
Key Switch and dismantle the wire from the negative electrode first. When
installing, you should connect the wire to the positive electrode first and then the
negative electrode. Make sure that you tighten up the screw / nut and don’t let
them slack.
·In order to prevent foreign substances from getting into the Storage Battery,
don’t open the Battery cover when cleaning it. If you don’t use the Storage
Battery for a long period of time, and in order to prevent the battery from
discharging on its own and leaking, you should dismantle the battery from the
motorcycle and fully recharge it, and then keep it in a well-ventilated but not
well-lit place. If you want to keep on the motorcycle, please disconnect the
electric wire from the negative electrode.