28
8. Checking and Adjusting the Clutch Lever
The free travel distance of the Clutch Lever is 10-20 mm. Please check this any time and make
appropriate adjustment to the screw nut whenever necessary. If you turn the screw nut in the direction of
A, you will shorten the free travel distance of the Clutch Lever.
Caution:
·The function of the Clutch Lever is to pass on the horsepower of the engine to
the Rear Tyre so as to effectively generate driving power. Therefore, whether
the Clutch Lever is appropriately adjusted has a direct impact on the functions
and performance of the motorcycle. If the Clutch Lever doesn’t work properly,
it’s hard to change the gear and the Rear Wheel may spin and make the
motorcycle fall.
·After the adjustment, make sure that you can change the gear easily and engine
works properly.
·If the free travel distance of the Clutch Lever is too short or if the Clutch Lever
is too tight, the Clutch disc may be damaged.
9.
Readjusting the Throttle Wire
Check the following and make appropriate adjustments:
·whether the Throttle Wire can be changed from “Fully Closed” to “Fully Opened”;
