HUONIAO HN125-4F Manual Download Page 28 | Manualshive

Page: 28 / 53

background image

27

·Then, you have to readjust the Brake Paddle to increase its free travel distance.

7

．

Readjusting the Brakes

Front Brake readjusting

·Check the level of the Brake Oil in the Brake Oil Box.

·If the level of the Brake Oil is lower than the Lower Marking Line, please add some Brake Oil.

·The Brake Oil standard is DOT.3. Brake oil in different standard can not be commixed use.
<Adjusting the free travel distance of Rear Brake Paddle>: Turn the screw nut of the Rear Tyre Brake
Lever to adjust the free travel distance of the Rear Brake Paddle.
·Readjusting is to turn the screw nut.

·When you turn the screw nut clockwise, the free travel distance of the Rear Brake Paddle is shortened;
otherwise it is lengthened.

·After the adjustment, press down the Rear Brake Paddle till it stops. Use a ruler to measure the free
travel distance of the Brake Paddle to see whether it is within the normal distance range 20-30 mm.

·Damage to the Pulling Wire of the Brake: Look at the Pulling wire of the Brake to see if it is damaged or
broken, or if it is entangled with any part of the motorcycle; check the joints with a spanner or other tools
to see if they are loosened; in addition, check the Handlebars to see how much they shake when turning or
in the course of driving.
·Check the Front Brake and the Rear Brake respectively when driving on a dry land and at a low speed to
see whether they work properly.

«
...
26
27
28
29
30
...
»

Summary of Contents for HN125-4F






















































Reviews:

No comments

Related manuals for HN125-4F

Brand: KEEWAY Pages: 164

Brand: hepco & becker Pages: 5

Brand: LAZER Pages: 19

Brand: Kong Pages: 72

EC-SIX DAYS - PART LIST 2011

Brand: GAS GAS Pages: 6

Brand: Honda Pages: 190

Brand: Denali Pages: 2

Brand: Honda Pages: 330

Brand: LAS Pages: 22

Brand: Shark Pages: 16

Brand: Protos Pages: 6

Brand: VESPA Pages: 249

Brand: RIEJU Pages: 7

Brand: Yamaha Pages: 114

Brand: Yamaha Pages: 119

Brand: Yamaha Pages: 104

Brand: Yamaha Pages: 108

Brand: Yamaha Pages: 572

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands