21
Technical Data
6. Technical
Data
Equipment Classification
Type of protection
against electric shock.
Class 1 and Internally powered equipment
Degree of protection
against electric shock
Type CF - equipment with an applied part, intended for
direct electrical connection to the heart. The equipment
is defibrillation discharge protected. The SpO2 and
non-invasive blood pressure defibrillation discharge
protection is provided by the applied parts themselves
and intrinsically by the probe and blood pressure cuff.
The ECG module is designed with spark gaps to
minimise problems associated with stray currents
generated by defibrillation, diathermy etc.
Mode of operation.
Continuous
Degree of protection
against harmful ingress
of water.
IPX1
Degree of safety
of application in
the presence of a
flammable anaesthetic
Equipment not suitable for use in the presence of a
FLAMMABLE ANAESTHETIC MIXTURE WITH AIR,
OXYGEN OR NITROUS OXIDE
Electrosurgery Surgical
Equipment
This unit does not provide protection against HF burning
from other surgical equipment.
General
Supply voltage
100 to 240V 50/60Hz.
Fuse Type
T1A - 250VAC Littelfuse 0213001
Power input
120 VA
Optional DC
input
12.5 - 15VDC @1.5Amps.
Note: Equipment must comply with the safety requirements of
EN60601-1-1 Medical Electrical Equipment, General Requirements
for Safety.
Screen
8.4 inch diagonal high brightness TFT SVGA flat panel display
Trace speed
50, 25, 12.5 and 6.25mm per second for ECG and SpO2
waveforms. The Respiration waveform trace speed is 6.25mm per
second.
Trace freeze
On all traces.
Battery
12V NiMH type with smart charger and fuel gauge type indication
of battery status. Approximately 3 hours of continuous monitoring
is available from a fully charged battery.
Size
240mm wide, 223mm high (including feet), 160mm deep
(including equipotential earth connector
Weight
3.3kg
Outputs
10/100 Ethernet socket (RJ45) for connection to Smartsigns
Central Nurse Station, Serial port (9 pin ‘D’) for software upgrade
or connection to Huntleigh Healthcare BD4000, 6 way mini DIN for
external keyboard and a VGA socket for a slave monitor.