CARE
17
Removing the Shade
Remove the Fabric Panel(s) (If Neccessary)
■
Unscrew the end cap and slide the panel and rollers out of the headrail.
Remove the Headrail
■
Open the shade if the fabric is still installed.
■
While holding the headrail, push back
on the bottom tab of each installation
bracket using a small fl at blade
screwdriver to release the bottom edge
of the headrail.
■
After releasing the bottom edge, rotate
the back of the headrail down and out
from the brackets.
Cleaning Procedures
Hunter Douglas Vignette
®
Modern Roman Shades are made of an anti-static, dust-resistant
fabric that repels dirt and dust. For most fabrics, the options below are available if your shade
needs cleaning.
Dusting
■
Regular light dusting with a feather duster is all the cleaning needed in most circumstances.
Vacuuming
■
Use a hand-held vacuum with low suction for more thorough dust removal.
Compressed Air / Hair Dryer (Cool Setting)
■
Blow dirt and debris from within the fabric folds using clean, compressed air or a hair dryer
set on a cool setting.
Spot-Cleaning
■
Prepare a solution of warm water and mild detergent.
■
Dampen a clean cloth in the solution and wring it out.
■
Place a dry, clean cloth behind the spot between the face fabric and the back fabric.
■
Dab the spot with the dampened cloth until it is gone. Do not rub the fabric.
■
Rubbing alcohol or non-oil-based baby wipes may be used on more stubborn stains.
■
Allow the shade to dry in the completely closed position.
Bottom
Tab
Back of
Shade
Headrail
Bracket
