INSTALLATION
8
Install the Headrail
■
Wide headrails may arrive in two separate pieces.
Connect the two pieces with a joining plate.
➤
Insert the joining plate into the top back channel
of one of the headrail pieces. The tabs on the
joining plate are slightly angled. Place the joining
plate so that the tabs angle down toward the
headrail in order to secure each rail piece.
➤
Slide the second rail piece onto the joining plate.
➤
Remove the adhesive from the fabric tab. Press
the tab into place over the split on the front of the
headrail.
■
Slip the headrail onto the installation brackets, until
the front of the brackets fi ts under the groove of the
headrail.
■
Rotate the back of the headrail up and push back to
snap it into the bracket.
Headrail
Bracket
The front of the bracket
fits under the groove.
The back of the headrail
snaps into the bracket.
Joining Plate
Tabs Angled
Down Toward
Headrail
Fabric Tab
