HunterDouglas Solera EasyRise, Installation Operation Care

Page: 14 / 20

OPERATION
12
Problem
The shade drop is too low or too high or the middle rail on a Top-Down/
Bottom-Up is too low or uneven.
Solution
■
Unsnap the fabric flap on the bottom rail.
■
Each cord can be adjusted.
Begin by sliding the cord
wedge(s) to release the
cord.
■
Place the bottom rail to the
desired height.
■
Push cord wedge(s) back
into place to secure the
cord position.
■
Snap the fabric flap back
into place.
Problem
EasyRise
™
Shades Only: The universal cord tensioner has climbed to the
headrail.
Solution
Pull down on the spring to relieve tension and pull the universal cord tensioner
to the bottom of the cord loop. Properly mount the cord tensioner. See “Attach
the Universal Cord Tensioner — EasyRise™ Only” on page 8 and/or the
instructions included with your
Universal Cord Tensioner Installation Kit .
Problem EasyRise Shades Only: The universal cord tensioner grabs onto the cord
upon operation.
Solution Check that the universal cord tensioner is mounted properly. Reinstall, if
necessary. See “Attach the Universal Cord Tensioner — EasyRise Only” on
page 8 and/or the instructions included with your
Universal Cord Tensioner
Installation Kit .
Wedge
Wedge