HunterDouglas Solera EasyRise, Installation Operation Care

Page: 8 / 20

INSTALLATION
6
Mount the Installation Brackets — Outside Mount
■
Center the headrail over the window opening at the desired height. Use a pencil to lightly
mark each end of the headrail.
➤
Alternatively, measure the width of the headrail and use that width to mark the
headrail end points over the window opening.
■
Mark 3" in from each end of the headrail.
➤
If more than two installation brackets came with your order, space additional
bracket(s) evenly between the two end brackets and mark their location. Mount into
wood whenever possible.
■
Center the brackets on your marks and mark the screw holes.
➤
A minimum of 1
3
/
4
" flat vertical
surface is required to mount the
brackets.
➤
The top of the installation brackets
should be at the desired shade height.
IMPORTANT: The brackets should be
level and aligned.
CAUTION: The rear of the brackets must
be flush against a flat mounting surface.
Do not mount brackets on
curved molding.
■
Extension brackets provide up to 1 ½ " of clearance.
If used, center the brackets on your marks and
mark the screw holes.
■
Drill the screw holes using a
3
∕
32
" drill bit.
CAUTION: Use drywall anchors when mounting
into drywall. Drywall anchors are not provided.
Headrail End Marks
Window Opening
3" 3"
Space Evenly Space Evenly
3"
Installation
Bracket
Headrail
End Mark
Extension
Bracket