background image

CHILD SAFETY

14

Warning

Young children can STRANGLE in cord loops. They can also wrap cords around their 

necks and STRANGLE.

 

Always keep cords out of the reach of children. 

 

Move cribs, playpens and other furniture away from cords. 

Children can climb furniture 

to get to cords.

Cord Loop Shades

 

Attach the cord tensioner on the cord loop to the wall or window 
casement. 

See “Attach The Universal Cord Tensioner (UCT)” on 

page 8. This can prevent children from pulling cord loops 

around their necks.

 

Hunter Douglas provides a cord tensioner installation kit with instructions 
for attaching the cord tensioner. 

For the shade to operate properly, the 

cord tensioner must be correctly mounted and

 

secured.

 

Fasteners provided in this kit may not be appropriate for all mounting 
surfaces. 

Use appropriate anchors for the mounting surface 

conditions.

 

Only Hunter Douglas supplied cord tensioners and hardware should be used. 

Replacement parts may be obtained by contacting the  

Hunter Douglas Consumer Support Center at 1-800-265-8000.

For more safety information call 1-888-501-8364 
in the U.S. or 1-866-662-0666 in Canada. 

WARNING

NOTE:  

The warning labels on the bottom rails of corded window coverings contain 

important safety information. These warning labels are designed to be permanent,  
in accordance with the industry’s safety standards, and must not be removed.

Summary of Contents for Solera EasyRise





















Reviews: