click
click
Slide the end caps onto
the brackets.
Snap the end caps onto the brackets until it clicks into
place.
Slide the end cap towards you
to remove from the bracket.
Lift the backside of the endcap away from the bracket,
then slide the end cap towards you.
BRACKET COVER INSTALLATION
Coupled
S
and
Heavy Duty+
Manual Clutch Installation
4 of 4
BRACKET COVER REMOVAL
SHADE REMOVAL
UNLOCK THE SHADE
Move the shade
downward and out
of the clutch bracket.
2
1
3
REMOVE CLUTCH END
S END CAPS
HEAVY DUTY+ END CAPS
© 2018 Hunter Douglas. All rights reserved. All trademarks used herein are the property of Hunter Douglas or their respective owners.
Las Vegas • Chicago
800.229.5300
HDhospitality.com
S BRACKET
HEAVY DUTY+ BRACKET
REMOVE COUPLED SHADE FIRST
Place a screwdriver between
the bracket and bearing plug
and push towards the aligner
to remove the shade. Move
the shade downward and
out of the bracket. Remove
the aligner or connector from
the bearing plug.
Slide the
aligner or the
connector out
of the shade.
Rotate the nut
on the idle end
counterclockwise
to unlock the
shade.
