Slide the screw cover
over the bracket until
it snaps in place.
HEAVY DUTY+ BRACKET SCREW COVERS
Place the clutch
onto the clutch
bracket.
Push the shade
against the clutch
end and lift the roller
shade up until the end
plug fits into the center
of the idle bracket.
2
1
SCREW COVER INSTALLATION
Coupled
S
and
Heavy Duty+
Manual Clutch Installation
2 of 4
INSTALLING THE SHADE -
Do not remove the tape around the shade until it is fully installed
© 2018 Hunter Douglas. All rights reserved. All trademarks used herein are the property of Hunter Douglas or their respective owners.
Las Vegas • Chicago
800.229.5300
HDhospitality.com
CLUTCH BRACKET
IDLE BRACKET
MOUNT OUTER BRACKET AND COUPLER
MOUNT THE COUPLED SHADE
COUPLING 2 INTERMEDIATE BRACKETS
ALIGNER SET ADJUSTMENT
Fix the outer
bracket
inside the
pocket with
the screws
provided.
Place the
tube with
plug
connector
on the
aligner or
connector
set head.
Press the
tube
bearing
plug, lift
the roller
shade and
snap into
the idle
bracket
end.
Slide the
aligner or the
connector
through the
bracket into
the idle end.
Fix the inner
bracket with
the screws
provided.
Slide the
aligner or the
connector
through the
bracket into
the idle end.
click
2
1
2
1
3
To align the bottom
hembars, pull the shade
away from the aligner set
(1), turn the shade to line
up the bottom hembars
together (2). Release the
shade to secure the
position (3). Not possible
when using a connector
set.
