Rotate the nut on
the idle end
clockwise until it
meets the tube.
This locks the shade
into position.
LOCK THE SHADES
CHECK SHADE
OPERATION
UNLOCKED
CORD TENSIONER
INSTALLATION
BALL STOP
INSTALLATION
LOCKED
Coupled
S
and
Heavy Duty+
Manual Clutch Installation
3 of 4
© 2018 Hunter Douglas. All rights reserved. All trademarks used herein are the property of Hunter Douglas or their respective owners.
Las Vegas • Chicago
800.229.5300
HDhospitality.com
Remove the tape from the shade.
Make sure the shade operates properly.
Pull the front chain down to raise the shade.
Pull the back chain down to lower the shade.
Adjust leveler if applicable.
SET LOWER LIMIT
Lower shade to the bottom of the window opening.
Place a ball stop over the chain in front of the clutch
and secure using pliers.
SET UPPER LIMIT
Raise shade to the desired height.
Place a ball stop over the chain in back of the clutch
and secure using pliers.
Be sure the cord tensioner is not placed in the path of the bottom
rail and fabric.
Unlock the cord tensioner by removing the plug from the screw hole
and pushing down.
Hold the cord tensioner firmly in place and check that the bead chain,
ball stop, and chain connector can move freely through it. The chain
should not be taught.
Mark the screw hole with a pencil. Attach the cord tensioner directly
to the wall using a 1½” screw. Use a wall anchor if necessary.
