HunterDouglas PowerView M25T, Manual

Page: 25 / 30

6. Special motor functions
This chapter describes how to activate special functions with a standard PowerView® remote control:
6.1. Delivery conditions
Before these functions can be set, following conditions are required:
1. Check motor type
2. No motor limits are set (factory default)
3. A PowerView® remote control is paired with the motor
5.2.9 The fabric open position is cleared!
Note
To set a new fabric open position, repeat step 5.1. Setting fabric open position .

Disable slow scene speed
When activating a PowerView® scene with the PowerView® App, the
motor's running speed will be the same as using the up and down buttons
on a PowerView® remote. The slow scene speed (default) will be disabled.
Change the motor type
Changing the motor type was only possible by using the PowerView®
Programmer software tool.
A standard PowerView® remote can be used instead.
IMPORTANT
These special functionalities are only available from motor serial number 0020153 onwards .
Always check the motor's serial number on the product label.

MANUAL
Page 25 of 30 version: 1.2