EN
English –
5
“
1
”
04
02
01
05
5
sec.
03
THE
END
1
“
0
”
5
sec.
2
5.5 - Setting force on closure: “RDC” function
Caution! - The “RDC” function level can only be personalised after programming the limit position values “0” and “1”.
01.
Use the
Up
or
Down
button to move the awning to the point of mid-travel.
02.
Press and hold the
Up
pushbutton until the aw ning reaches limit position “0” (do not release the button).
03.
Then, with the
Ascent
button still pressed, press the
Descent
button the number of times as the level to be selected (press each time for 1 second, with a pause
of 1 second before pressing again). With the
Up
button still pressed, wait until the awning completes the same number of movements (in the down direction) as
the new level set. The levels available are:
level 1
= maximum force (factory setting.) /
level 2
= medium force /
level 3
= minimum force
04.
Then release the
Up
button.
x 1
= forza massima /
x 2
= forza media /
x 3
= forza minima /
04
02
01
03
1
/
2
/
3
THE
END
“
0
”
?
5.6 - Tensioning the fabric: “FRT” function (position “2”)
This function is used to tension the awning canvas when open. The function is activated by programming position “
2
” in Era Star T.
During use of the automation, when the awning opens, the motor moves it first to position “
1
” and then immediately tensions the canvas by automatically activating a
short up movement to position “
2
”.
Caution! - The “FRT” function level can only be set after programming the limit position values “0” and “1”.
• To activate the “FRT” function
01.
Use the
Up
or
Down
button to move the awning to the point of mid-travel.
02.
Use the
Down
button to move the awning to position “
1
”.
03.
Press and hold both the
Up
and
Down
buttons until the awning performs a short up movement and then release the buttons.
04.
Use the
Up
button to close the awning by a few centimetres, until the canvas can be seen to be adequately tensioned (this will be position “
2
”).
05.
Press and hold both the
Up
and
Down
buttons until the awning performs a short up movement and then release the buttons.
04
THE
END
02
01
“
2
”(
1
)
03
5
sec.
5
sec.
05
(
1
)
“
2
”
2/3c
m~
1
1
“
1
”
• To deactivate the “FRT” function
01.
Use the
Up
or
Down
button to move the awning to the point of mid-travel.
02.
Press and hold both the
Up
and
Down
buttons until the awning performs a short up movement and then release the buttons.
03.
Press and hold the
Down
button to move the awning to limit position “1” and release at exactly the time at which the awning stops at this limit.
04.
Press and hold both the
Up
and
Down
buttons until the awning performs a short up movement and then release the buttons.
Note
– After cancelling position “2” the awning will move between the limit positions “0” and “1”.
x 1
= maximum force /
x 2
= medium force /
x 3
= medium force /
