OPERATION
16
Problem
The bottom rail(s) do not raise completely, or lower completely, or the
location when fully lowered has migrated over time.
Solution
The batteries may be low in the battery wand, satellite battery pack, or C-size
satellite battery wand. Replace the batteries. Refer to “Batteries in the battery
wand need to be replaced” above.
Check that the battery wand, satellite battery pack, C-size satellite battery
wand, or 18V DC power supply is securely connected to the power cable and
the cables are not pinched or caught in the headrail or installation brackets.
Check that there is clearance between the ends of the shade and the window
casement on inside mounts.
The shade may need to be reset. Refer to “Resetting the Shade (If Necessary)”
on page 13.
The back panel lower limit may need to be adjusted. Refer to “Back Panel
Lower Limit Adjustment” on page 14.
For information regarding operation and programming of the PowerView
remote, refer to your
PowerView Automation Remote Control Guide
or
to the online PowerView Step-by-Step Guide at
hunterdouglas.com/
operatingsystems/motorized/powerview-motorization/manuals
.
Problem
The shade operation is slow.
Solution
The batteries may be low in the battery wand, satellite battery pack, or C-size
battery wand. Check battery orientation or replace the batteries.
Check that the battery wand, satellite battery pack, C-size satellite battery
wand, or DC power supply is securely connected to the power cable and the
cables are not pinched or caught.
Summary of Contents for Duolite Shades
Page 22: ...Notes ...
Page 23: ......
