HunterDouglas Applause Installation Manual Download

Page: 4 / 35

GETTING STARTED

Thank you for purchasing Hunter Douglas Duette

or Applause

SkyLift

™

Honeycomb Shades.

With proper installation, operation, and care, your new shades will provide years of beauty
and performance.
Please thoroughly review this instruction booklet and the enclosed packing list before
beginning the installation.

Mounting Types

CAUTION:

This shade cannot be installed as a “side stack” shade, operating from side-to-

side within the window. Also, it cannot be installed as a “top-down” shade, where the fabric
stack is at the bottom of the window.

Tools Needed

■

⁄

" Allen wrench (provided)

■

Level (laser level is recommended)

■

Measuring tape and pencil

■

Needle-nose pliers

■

Phillips screwdriver (magnetized screwdriver is recommended)

■

Power drill,

⁄

" drill bit, and

⁄

" hex driver

■

Sharp scissors

■

Tape

Inside Mount

Shade fits within

window opening.

Outside Mount

Shade mounts outside

window opening.

Summary of Contents for Applause




































Search results

Summary of Contents for Applause

Reviews:

Related manuals for Applause

Brands by name

Popular brands

HunterDouglas Applause, Installation Manual

Search results

Summary of Contents for Applause

Reviews:

Related manuals for Applause

Brands by name

Popular brands