INSTALLATION
16
Mount the Shade
■
Slip the upper portion of the
shade into the window frame.
Make sure the installation
brackets fit into the notches on
the plastic hooks (inset).
■
Slip a screwdriver behind the
shade and push back the
brackets to install the lower end
of the shade.
■
Additional holes are punched in the side rails 8" from
each corner. You may attach the side rails to the window
frame using the provided extra screws.
IMPORTANT:
Do not overtighten these screws. Doing so
can cause the side rails to bow in and prevent the shade
from operating correctly.
NOTE:
Additional screws can be added to secure the
larger shades. If you choose to use more screws, drill
installation holes on the screw indicator grooves in the
side rails.
Attach the Corner Covers
■
Remove the adhesive backing from the corner covers.
■
Press a cover onto each shade corner, extending them to
the window frame to cover the light gap.
If you have the wall or ceiling mounted satellite battery pack,
rechargeable battery wand, or the 18V DC Power Supply, proceed to
“Finish Mounting the Power Supply” on page 19. Otherwise proceed to
“Operating the PowerView® App and Gen 3 Remote” on page 22.
Screw Indicator
Grooves
Corner
Cover
Summary of Contents for Applause
Page 33: ...CHILD SAFETY 31 ...
