STAToR AdjuSTMenTS – g80 RiSeRS
turn the riser upside down, remove the filter screen and view the stator area. notice the black part with the three
sections extending outward from the center (fig 60). this black part on g80 risers is called the adjustable stator plate.
beneath the adjustable stator plate is a gray non-removable part with the three openings. this part is called the stator.
the stator has a series of numbers engraved into the plastic. these numbers are the nozzle size reference numbers.
to make an adjustment, rotate the adjustable stator plate to the right in a clock-wise direction (fig 61). notice the
small cutout or “window” on the adjustable stator plate. as the adjustable stator plate is rotated, the various nozzle
reference numbers will appear in the cutout/window. simply keep rotating the adjustable stator plate until the
desired nozzle number on the gray stator appears in the cutout/window. double-check to make sure the desired
nozzle number is visible in the cutout/ window. Finally, install the filter screen as outlined in the filter screen servicing
section above.
FIg 60
FIg 61
Fig 60
Fig 61
Fig 60
Fig 61
22
Summary of Contents for G835
Page 2: ......
Page 21: ...Fig 47 Fig 49 Fig 50 Fig 48 Fig 48 Fig 47 Fig 48 Fig 47 18...
Page 57: ...54...
