Hunter 44277W, Installation And Operation Manual

Page: 53 / 58

53
5. My heating or cooling will not turn on or off.
5 a. Check the heat/Cool function switch to ensure it is set to the
desired position.
5 b. Wait. There may be as much as a 4-minute delay before the system
turns on or off to protect the compressor.
5 c. Check the circuit breakers and switches to ensure there is enough
power to the system.
5 d. replace the batteries.
5 e. if applicable, make sure the furnace blower door is closed properly.
5 f. if your system has 4 wires, ensure the jumper wire is installed
between the rC and rh terminals.
....................................................................................
6. The display will come on, but it will not stay
illuminated.
6 a. replace batteries.
TroubleshooTing