Hunter 44277W, Installation And Operation Manual

Page: 19 / 58

19
ATTACHING THE THERMOSTAT
Lift the thermostat cover and set the
SYSTEM switch
to
OFF
and the
FAN
switch to
AUTO
.
1. Locate the
he/hg switch
on the back of the thermostat. Set
the switch to
HG
(default) for gas furnace and oil burners.
Set the switch to
HE
for electric furnaces.
(The switch has no effect when the system is set to cooling
mode.)
2. Locate the
Auto Recovery
switch on the back of the
thermostat. If you wish to use the Auto Recovery feature,
verify that the switch is in the ENABLE position. If you do
not wish to use this feature, simply change the switch
to the DISABLE position. See pages 44-45 for more
information.
3. System type - Locate the S
yStem
t
ype
switch on the
back of the thermostat. Select either STD (Standard) or
HP (Heat Pump) to match your system.
insTalling The ThermosTaT, ConT.