SURFACE/WALL MOUNT
© 2018 Hunter Douglas. All rights reserved. All trademarks used herein are the property of Hunter Douglas or their respective owners.
Las Vegas • Chicago
800.229.5300
HDhospitality.com
020519
END PLATES
INSTALLING A POCKET
BOTTOM CLOSURES
TOOLS NEEDED
Pencil
Level
Measuring
Tape
Drill with
bits
Screwdriver
Pocket Installation - 5.25" Single and 9" Single and Dual Shades
Manual
Single
Shade
Dual Shade
9” Pocket Only
Motorized
Single
Shade
Manual
Bracket
55L or 75L
Motor
Bracket
55L or 75L
Surface Mounted
Use bracket and shade instructions for
S & Heavy Duty+ Manual
Surface Mounted
Use bracket and shade instructions for
RB 500 Heavy Duty Bracket Motorized
Surface Mounted
Use bracket and shade instructions for
Heavy Duty+ 7" Dual Bracket Motorized or Manual
Mount into wood or metal studs
or into concrete with concrete
anchors. Drywall anchors are not
recommended.
Determine the mounting location.
Pre-drill the pocket. Mount in
place.
Use a screwdriver to attach
the end plates with the
screws provided.
Tilt the bottom closure inside the
front edge of the pocket until the
closure catches on the inside ledge.
7" Dual
Motor
Bracket
Side View
1
of 4
