© 2018 Hunter Douglas. All rights reserved. All trademarks used herein are the property of Hunter Douglas or their respective owners.
Las Vegas • Chicago
800.229.5300
HDhospitality.com
2 of 4
OPTIONAL: INTEGRATED LEVELER
ADJUST LEVELER
IDLE END
TOOLS NEEDED
INSTALLING THE BRACKETS
Pencil
Level
Measuring
Tape
Drill with
bits
Allen Key
(provided with
optional Leveler)
Screwdriver
Pliers
040419
MOTORS
Sonesse 50 RTS 506S2 & 510S2 120V AC
Plug-In
Quick Disconnect
Motor Front Plate
(comes attached to motor)
Insert the provided Allen key into the set screw of the leveler.
Adjust skewing by turning the Allen key left or right to move
the shade up or down. Support the shade with your hand if
necessary.
All adjustments can be made after the shade has been
installed and after the operation has been tested.
Sonesse 50 RTS 506S2 & 510S2 Motor
with
Coupled
7" Dual Brackets in 9" Pocket
Motorized Shade Installation Series 5-267–216
Compatible Motors
LT50 RA 525A2
LT50 Altus RTS 525A2
Sonesse 50 RTS 506S2
Sonesse 50 DCT 506S2
Sonesse 50 RA 506S2
Sonesse 50 RS485 506S2
Sonesse 50 RTS 510S2
Sonesse 50 DCT 510S2
Sonesse 50 RA 510S2
Sonesse 50 RS485 510S2
Sonesse ULTRA 50 RTS 506A2
Sonesse ULTRA 50 RA 506A2
Sonesse ULTRA 50 RS485 506A2
LT50 RS485 515S2
LT50 RS485 535A2
Sonesse ULTRA 50 DC RTS 504A8
Sonesse 50 DC RS485 504A8
Sonesse 30 RTS
Sonesse 30 DCT
Sonesse 30 RS485
7" DUAL BRACKETS IN A 9" POCKET
Determine the mounting location inside the pocket.
Measure and mark the bracket locations with a pencil.
Mount brackets with the screws provided. Pre-drilling is
recommended.
Check that the brackets are level and aligned.
