3
click
1
2
3 of 4
INSTALLING THE SHADE -
Do not remove the tape around the shade until it is fully installed
© 2018 Hunter Douglas. All rights reserved. All trademarks used herein are the property of Hunter Douglas or their respective owners.
Las Vegas • Chicago
800.229.5300
HDhospitality.com
MOTOR BRACKET
2
1
Push the shade against the
idle end and lift the roller
shade up until the motor
front plate fits into the
motor bracket.
Turn the roller shade approximately
10˚ in the rolling direction and close
both fasteners of the brackets.
Repeat to install the front shade.
MOUNT OUTER BRACKET AND COUPLER
MOUNT THE COUPLED SHADE
COUPLING 2 INTERMEDIATE BRACKETS
ALIGNER SET ADJUSTMENT
Fix the outer
bracket in to
the pocket
with the
screws
provided.
Place the
tube with
plug
connector
on the
aligner or
connector
set head.
Press the tube
bearing plug,
lift the roller
shade and
snap into the
idle bracket
end.
Slide the
aligner or the
connector
through the
bracket into
the idle end.
Fix the inner
bracket with the
screws provided.
Slide the aligner or
the connector
through the
bracket into the
idle end.
2
1
2
1
3
To align the bottom
hembars, pull the shade
away from the aligner set
(1), turn the shade to line
up the bottom hembars
together (2). Release the
shade to secure the
position (3). Not possible
when using a connector
set.
click
Sonesse 50 RTS 506S2 & 510S2 Motor
with
Coupled
7" Dual Brackets in 9" Pocket
Motorized Shade Installation Series 5-267–216
