CARE
30
■
Make sure stains are pre-treated to maximize the benefits of cleaning.
■
Hang fabrics immediately after cleaning with the vanes open and the loops evenly spaced.
Allow the fabric to drip dry completely.
Wrinkle and Crease Removal
Both the hand and steam machine methods described below are suitable for wrinkle and crease
removal. The hand method is more appropriate for smaller areas.
Hand Method
■
Rotate vanes to the fully opened position.
■
Apply warm distilled or bottled water to a clean, white cloth.
■
Support the fabric from behind using another clean, dry cloth.
■
Blot the wrinkle or creased area with the wet cloth.
■
Let the area air dry.
Steam Machine Method
■
Rotate vanes to the fully opened position.
■
From behind, direct the steam (maximum temperature 102º F) from a portable steam
machine to penetrate the fabric.
■
Use slow, short vertical movements. Begin at the top of the fabric and work your way down.
Several passes over the creased area may be needed.
■
Let the area air dry.
A Note About Textiles
As with all textiles, Luminette
®
fabrics are subject to some variations.
■
The fabric will change as its position changes.
■
Minor wrinkles, puckers, or other variations can appear and are inherent to this textile
product. Slight puckers in the fabric may be most noticeable when the fabric is traversed
across the opening after having been in the stacked position for a period of time. If desired,
the fabric may be steamed to minimize these minor variations. Steam from the rear side of
the fabric whenever possible.
■
Such variations, like those just mentioned, are normal, acceptable quality.
Summary of Contents for Luminette PowerGlide 2.1
Page 35: ......
