116
8.
Factory Default
If you forget your password, please follow the steps below to restore its
default settings.
•
Remove the power and Ethernet cable.
•
Join
GND
&
Default
ports inside the terminal block with an electronic wire.
•
Connect the power for the camera to reboot for around 30 seconds.
•
Remove the wire in the terminal block after rebooting completes.
•
Open the internet browser using default IP (http://192.168.1.200)
•
Input
admin
for both user name and password to log in.
You may also perform
System Update
when you
operate the camera by remote. Please refer to
instructions.
