114
II.
I/O Setup
Enter
I/O Setting
via internet browser & check
Out1
to enable I/O signal.
Input Setting
The IP Cam supports both input and output operations. When the input
condition is triggered,
the relay will be also triggered & a notification will be
sent depending what checkboxes are ticked.
Log:
Tick
Save to SD card
checkbox to enable
Log
which you would like to save
data with.
Subject:
Input or edit the message you would like to receive for triggered alarm.
Interval:
If you select "10 sec" here, once the motion is detected and action is
triggered, it cannot be triggered again within 10 seconds.
Based on the schedule:
Tick its checkbox to assign the timetable from
Schedule
of the
Event
Menu. Please refer to
Schedule
from
Event List
.
Click on the underlined
schedule
title to enter to the schedule setup menu.
Output Setting
The output mode affects the DO or relay out duration.