SmarTracks Diagnostics v.3.16 Installation Guide & User Manual
38
The intervals in our list are read as follows:
Interval list type 1: 0-5-20; 0-5-10-20; 0-5-10-20-60-100
This is a simple list of the respective intervals, which are always separated by a minus.
For example:
▪
0-5-20: There is a timing gate at 0m, 5m and 20m.
▪
0-5-10-20: There is a timing gate at 0m, 5m, 10m and 20m.
▪
0-5-10-20-60-100: There is a timing gate at 0m, 5m, 10m, 20m, 60m and 100m.
Interval list type 2: 0-5-30m (every 5m); 0-10-110m (every 10m); 0-10000m (every 50m); 0-10000m
(every 100m)
To avoid long lists of intervals, we summarize the intervals if the distance between stays equal, e.g.
every 10m. In this case, only the first and last measurement point are mentioned with the consistent
distance between each point following in brackets.
For example:
▪
0-5-30m (every 5m): There is a timing gate 0m, 5m, 10m, 15m, 20m, 25m and 30m.
▪
0-10000m (every 50m); There is a timing gate 0m, 50m, 100m, 150m, 200m, etc.
▪
0-10000m (every 100m): There is a timing gate at 0m, 50m, 100m, 200m, 300m, etc.
Interval list type 3: 0-5-100m (5+5+10+...+10); 0-10-110m (10+5+5+10+...+10)
This kind of list is used if you have irregular gate patterns. You can see in the example that a few
gates are just 5m apart instead of 10m. The irregular gates will be listed with individual distance of
the interval and will be divided by '+'. The regular gates will be summarized by '...'.
For example:
▪
0-5-
100m (5+5+10+…+10): There is a
timing gate at 0m, 5m, 10m, 20m, 30m, 40m, 50m,
60m, 70m, 80m, 90m, and 100m.
▪
If your desired interval is not listed in the Diagnostics software, you can manually add the in-
terval to the list:
STEP 1: Close the SmarTracks Diagnostics software
STEP 2: Go to
"…
\Documents\SmarTracks Diagnostics\Data\"