SmarTracks Diagnostics v.3.16 Installation Guide & User Manual
8
The angled setup is done with the help of an angled mount, which is stuck in the hole of the cone.
Rotate the black MCD holder to a
45 degree angle
and insert the MCD with the Humotion logo on the
high end. (see figure 1, 2 and 3).
IMPORTANT: The Humotion logo on the rods (MCD’s) should always
face upwards. This applies for
both the straight and the angled setup.
You can either place both magnetic elements angled, both magnetic elements straight, or one angled
and one straight.
Example of an angled setup:
Figure 1: Angled mount
Figure 2: Angled magnetic ele-
ment (Cone + angled mount +
magnetic rod (MCD))
Figure 3: Angled magnetic ele-
ment (Cone + angled mount +
magnetic rod (MCD))