Use the bracket, which fits your transducer, and refer to one of the three following illustrations for
the appropriate assembly instructions. Parts have been included for both installation procedures,
so there will be some parts remaining.
If you choose to install the transducer permanently, additional hardware will be required. Call
Humminbird Customer Support for more information.
The wing nut allows you to adjust the angle of the transducer in the water so that it points straight
down. Initial assembly of the suction cup requires the use of a phillips head screw driver.
Installation and adjustment can be performed without the use of tools.
It is important that the transducer be mounted beneath the surface of the water, pointing straight
down. The suction cup mount is designed for quick, easy installation and removal, not for high-
speed operation. If you intend to operate your boat at any speed faster than trolling speeds,
remove the suction cup transducer from the water. The transducer can cause damage or pull the
portable unit into the water if it releases at high speed.
Summary of Contents for Wide Portable
Page 1: ......