Any 6-volt lantern battery may be used: however for maximum battery life, we recommend using
heavy -duty alkaline batteries.
The Humminbird Accessory part number “BAP” allows you the use of 4 “D” cell batteries in place
of the lantern battery. This allows the use of rechargeable type batteries to power the portable
unit. Refer to the Humminbird Accessory catalog for more information.
The actual life of a set of batteries can vary greatly depending on the type of battery and the
ambient temperature. Wide units can operate 100 hours or move at an ambient temperature of 70
degrees. A decrease in ambient temperature will decrease the life of the battery. Refer to the
diagram inside the battery compartments and install the batteries. Since different manufacturers
make slightly different size batteries, it may be necessary to adjust the length of the spring
contact to insure positive contact.
Re-install the battery covers by inserting the tab at the rear of the cover into the slot on the lower
housing, and then snap the lid into place.
PORTABLE TRANSDUCER ASSEMBLY
A suction cup mount and mounting bracket is included to adapt a transducer to portable
operation. If you purchased the Portable case without the Humminbird unit, three types of
mounting brackets are included to adapt your existing Humminbird transducer to portable
operation.
Summary of Contents for Wide Portable
Page 1: ......
