9
Power On and Confirm Connections
MEGA Live Status Icon
Icon Description
Connected/In Water/Pinging:
The MEGA Live is connected, in the water, and pinging.
Connected/In Water/Not Pinging:
The MEGA Live is connected and in the water, but it is
not pinging.
Connected/Out of Water:
The MEGA Live is connected, but the wet indicator is out of the
water.
Connection Lost:
The connection to the MEGA Live was lost.
NOTE:
For additional system status, select Home > Settings > Network > Network Info.
HELIX Series
You can confirm the MEGA Live connection by checking the Accessory Test view.
1. Press and hold the VIEW key.
2. Select System > Accessory Test.
Confirm MEGA Live is shown as Connected.
It may take up to two minutes for the MEGA Live to be detected.
Unconnected:
If the MEGA Live icon is listed as Unconnected, check the cable and power connections to confirm they are
secure and powered on. Review the installation guide that was included with your MEGA Live Imaging Transducer to confirm
it is installed correctly.
HELIX Accessory Test
MEGA Live
Imaging listed
as connected
GPS + Heading
Sensor listed
as connected
