manualshive.com logo in svg

Humminbird MEGA 360 Fortrex, Installation Manual

Share
Download
Humminbird MEGA 360 Fortrex Installation Manual Download Page 13

7

Update Software

Update Software with FishSmart

You can use the FishSmart App to download and push software updates directly to 
your Humminbird control head or accessory. 

NOTE:

 Your control head must already be running software release 1.610 or higher 

for HELIX Series or 3.110 or higher for SOLIX Series to support this feature.

NOTE:

 You must first download the FishSmart App and pair your mobile device to 

your control head. See the 

FishSmart User Manual 

for more information.

1.  Open the FishSmart App on your mobile device.
2. 

Apple iOS: 

Tap the System menu icon.

Google Android:

 Tap the FishSmart main menu. Select system.

3.  Tap Update next to the selected unit. The download progress is displayed on 

the screen.

4.  Tap Transfer next to the selected unit once the download is complete.
5.  Confirm the estimated transfer time.
6.  Tap the checkbox to select where to upload the software update (internal 

storage, card slot 1, or card slot 2).

NOTE:

 For SOLIX Series control heads, you cannot download software 

updates to an SD or microSD card with LakeMaster charts saved to it.

7.  Tap Transfer. The upload progress is displayed on the System menu in FishSmart 

and in the System Status view on the control head. 

8.  Follow the on-screen prompts on the control head to complete the software 

installation.

Summary of Contents for MEGA 360 Fortrex



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands