168
Manage your Control Head
Start the Timer
1.
Main Menu:
Press the MENU key twice. Select the
Alarms
tab.
2. Select Timer Setup.
3. Use the Cursor Control key to set the hours, minutes, and seconds.
4. To start the Timer immediately, select Start. Press the RIGHT Cursor key.
To save your settings and start the Timer at a later time, select Save. Press the RIGHT Cursor key.
NOTE:
The Timer can be displayed as a digital readout. See
Views: Display Digital Readouts
.
Change the Display Language
The available languages are determined by your Humminbird model.
1.
Main Menu:
Press the MENU key twice. Select the
Setup
tab.
2. Select Language.
3. Press the RIGHT or LEFT Cursor keys to select a language.
Change Digital Readout Formats
Use the following instructions to customize the format for the digital readouts displayed on the control head. See
Views: Display
Digital Readouts
for more information.
Change the Digits Format
If you have Digital Readouts set to Boxes, you can change how the numbers are displayed.
1.
Main Menu (Advanced User Mode):
Press the MENU key twice. Select the
Setup
tab.
2. Select Digits Format.
3. Press the RIGHT or LEFT Cursor keys to select a format.
Change Units of Measurement
1.
Main Menu:
Press the MENU key twice. Select the
Setup
tab.
2. Select Units - Depth, Units - Distance, Units - Speed, etc., and select each unit setting as you prefer.
3.
Close
: Press the EXIT key.
NOTE:
The Units - Temp menu is only available in an international model.
Summary of Contents for HELIX 10
Page 1: ...HELIX 9 HELIX 10 and HELIX 12 Operations Guide 532400 2EN_A ...
Page 4: ...4 ...
Page 6: ...6 ...
