5
WARNING:
In order to provide a lasting, waterproof bond, the overlay adhesive is
extremely sticky, and therefore you will NOT be able to re-position it once you have stuck
it onto the face of the HDR 610.
2. Carefully line up the notch on the bottom of the overlay with the tab at the bottom
of the face of the HDR 610, then press the overlay into place so that all buttons
and the display show through.
3. The bezel is keyed to fit only one way onto the front of the HDR 610. There are
two opposing sets of tabs on the inside of the bezel: two wide tabs, and two tabs
with slots in them. Find the tab that has the asymmetrical slots (refer to the
illustration) and push the bezel onto the front of the HDR 610 according to the
illustration.
Asymmetrical tabs
on bezel
HDR 610
Overlay
Bezel
