29
DEEP ALARM
The Deep Alarm function can be set for depths up to 99 feet, and sounds an alarm when
the depth measured is greater than the setting.
1. While in normal operation mode, press the SET key until the Deep Alarm setting
is displayed and the Deep icon is blinking.
2. Use the UP Arrow key to activate the Deep Alarm and also to increase the
selected value. Use the DOWN Arrow key to reduce the value. Press and hold the
UP Arrow key until you reach the desired depth setting.
NOTE:
The minimum Deep Alarm setting cannot meet or drop below the current Shallow
Alarm setting (see Shallow Alarm section).
3. After your selection is made, wait 5 seconds for the unit to return to normal
operation. The Deep icon should now be visible.
4. If the depth of the water is greater than the selected value, the alarm will sound
and the Deep icon will blink to indicate the alarm state. Pressing any key will mute
the alarm; pressing the SET key will mute the alarm and activate the Deep Alarm
function for additional adjustment. To permanently turn the alarm off, use the
DOWN Arrow key to return the display to Off.
