Humminbird 580 Operation Manual Download

Page: 56 / 134

Waypoint [Name]

(Only with an active cursor on a waypoint)

Waypoint [Name]

allows you to view the Waypoints submenu for the waypoint

under your cursor.

To view the Waypoint [Name] Submenu:

1. Move the cursor onto an existing waypoint and press the MENU key

once, or use

Cursor to Waypoint

to select a waypoint from a list of

saved waypoints.

2. Highlight

Waypoint [Name]

on the Navigation

X-Press™

menu.

3. Use the RIGHT 4-Way Cursor Control key to view the Waypoints

submenu, which contains the following menu choices:

The Waypoint Submenu contains the following menu choices:

Edit

allows you to edit the Name, Position (Latitude and Longitude) and select

the Icon that will be used to represent the waypoint in the Chart and Combo
Views.

Delete

allows you to delete a waypoint from the list of saved waypoints.

Target

allows you to apply a target to a waypoint selected from the list of

waypoints.

Grid

allows you to apply a trolling grid to a waypoint selected from the list of

waypoints.

Waypoint Submenu

Summary of Contents for 580







































































































































Search results

Summary of Contents for 580

Reviews:

Related manuals for 580

Brands by name

Popular brands

Humminbird 580, Operation Manual

Search results

Summary of Contents for 580

Reviews:

Related manuals for 580

Brands by name

Popular brands