background image

11

Understanding Sonar History

It is important to understand the significance of
the display. The display does NOT show a literal 3-
dimensional representation of what is under the
water. Each vertical band of data received by the
control head and plotted on the display represents
something that was detected by a sonar return at
a particular time. As both the boat and the targets
(fish) may be moving, the returns are only showing
a particular segment of time when objects were
detected, not exactly where those objects are in
relation to other objects shown on the display.

Real Time Sonar (RTS®) Window

A

Real Time Sonar (RTS®) Window

appears on the right side of the display in

the Sonar View only. The RTS® Window always updates at the fastest rate
possible for depth conditions and shows only the returns from the bottom,
structure and fish that are within the transducer beam. The RTS® Window plots
the depth and intensity of a sonar return. (See 

Sonar Menu: RTS® Window

) .

The 

Narrow RTS® Window

indicates the sonar intensity
through the use of grayscale.
The grayscale used matches
the bottom view grayscale
setting used in the sonar
history window (i.e. Inverse,
StructureID®, WhiteLine®,
Bottom Black).  The depth of
the sonar return is indicated
by the vertical placement of
the return on the display
depth scale.

The 

Wide RTS® Window 

in-

dicates the sonar intensity
through the use of a bar
graph.  The length of the
plotted return provides an
indication of whether the
return is weak or strong.  The
depth of the sonar return is
indicated by the vertical
placement of the return on
the display depth scale.  The
Wide RTS® Window does
not make use of grayscale. 

Summary of Contents for 580







































































































































Reviews: