37
To Select Readouts:
1. Make sure you are in Advanced User Mode, then highlight Select Readouts
on the Setup main menu.
2. Use the RIGHT 4-Way Cursor Control key to initiate this procedure.
3. The Select Readouts submenu will appear, showing a list of all Readouts.
Use the UP or DOWN Cursor keys to select a particular Readout position,
then use the RIGHT or LEFT Cursor keys to change what will be displayed at
that position. (Off, Speed, Temperature, Triplog, Voltage)
Depth O
Depth O
f
f
fset
fset
(Adv
(Adv
anc
anc
ed)
ed)
Depth Offset
will adjust the digital depth readout to indicate depth from the waterline
or boat's keel. Enter a positive vertical measurement from the transducer to the
waterline to read the depth from the waterline. Enter a negative vertical measurement
from the transducer to keel to read the depth from the keel. This menu choice is
available only when in Advanced User Mode
(see Setup Menu Tab: User Mode.)
To change the Depth Offset setting:
1. Make sure you are in Advanced User Mode, then highlight Depth Offset on
the Setup menu.
2. Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Depth Offset
setting. (-10.0 to +10.0 or -3 to 3 meters [
International Models Only
], Default = 0)
36
Selec
Selec
t R
t R
eadouts
eadouts
(Adv
(Adv
anc
anc
ed, Sonar View Only)
ed, Sonar View Only)
Select Readouts
sets individual digital readouts on
the Sonar View. This Advanced feature allows you
to select what data will be displayed in each of
either 5 or 6 (depending on your model) fixed-
position data windows arranged around the left
and bottom edges of the Sonar View screen, or
whether a particular window will be turned off,
displaying nothing in that area; you can access
this menu choice only when in Advanced User
Mode
(see Setup Menu Tab: User Mode.)
Data windows can display readouts from supported accessories such as Temp/Speed.
Each data window can either be empty or contain one of the following:
-
Speed
(will only be displayed if a Temp/Speed Accessory is attached and the
paddlewheel has moved at least once)
-
Temperature
-
Triplog
(will only be displayed if a Temp/Speed Accessory is attached and
the paddlewheel has moved at least once)
-
Voltage
.
Default Sonar View
Customized Sonar View
Select Readouts
