Setup Menu T
Setup Menu T
ab
ab
From any view, press the MENU key twice to access
the tabbed Menu System, then press the RIGHT
cursor key until the Setup tab is selected.
NOTE:
Units - Temp
(International Models Only)
Units - Distance
(Only if Temp/Speed is Connected)
Units - Speed
(Only if Temp/Speed is Connected)
Triplog Reset
(Only if Temp/Speed is Connected)
Language
(International Models Only)
Select Views
(Advanced)
Select Readouts
(Advanced)
Depth Offset
(Advanced)
Temp Offset
(Advanced)
Speed Calibration
(Advanced, Only
if Temp/Speed Connected)
Setup Menu Tab
30
L
L
ow Ba
ow Ba
t
t
t
t
er
er
y Alarm
y Alarm
Low Battery Alarm
sounds when the input battery
voltage is equal to or less than the menu setting. The battery alarm will only sound for
the battery which is connected to the fishfinder. The Low Battery Alarm should be set
to warn you when the battery voltage drops below the safety margin that you have
determined. For instance, if you are running a trolling motor (battery operated), you
would want to set the Low Battery Alarm to sound before the battery voltage drops too
low for it to be used to start your main, gasoline-powered engine.
To change the Low Battery Alarm setting:
1. Highlight Low Battery Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Low Battery
Alarm setting. (Off, 8.5V - 13.5V, Default = Off)
Alarm T
Alarm T
one
one
Alarm Tone
selects the pitch of the alarm sound. A
brief tone will be produced as you adjust the Alarm Tone so that you can select
the tone that you can hear best.
To change the Alarm Tone setting:
1. Highlight Alarm Tone on the Alarms main menu.
2. Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Alarm Tone
setting. (High, Medium, Low, Default = Medium)
31
