background image

 

19 

HUMIDIFIRST 

 

 

 

 

Maintenance (continued) 
 
 

End of humidifying season shutdown 
 
The humidifier Master Panel should be powered off when the humidification system will 
not be required for long periods of time.  This will stop heat gain from the transformer.  
This will also reduce ware on the electrical components that may occur during summer 
storms.  Shut off the power from the Building electric panel that feeds the Humidifirst 
Master Panel or unplug the individual humidifier control/power panels.  Also, empty the 
water from the humidifier basin and wipe dry. 
 
Humidistat 
 
The humidistat is calibrated and tested before it is shipped.  If you feel the humidistat is 
out of calibration you can field adjust it but by only a small amount.  If it is considerably 
out of calibration, a new one may be required.  Wipe any dust or dirt from the sensing 
element to help to achieve proper readings. 
 
When field calibration is called for, attempt to calibrate it in an environment that is 
close to the desired set point of the space being humidified.   Calibration should only 
be done with a sling psychrometer. 
 
To calibrate, set the humidifier humidistat indicator to read the same as the independent 
measuring device.  Remove the humidistat cover.  Locate the adjustment screw at the top 
of the humidistat and turn it until you hear a soft click.  The humidistat is now calibrated. 
 
Warranty 
 
The warranty for the humidifier module and the Master Panel is for one year from the 
date of start-up or 18 months from shipment, whichever comes first.  Please find and 
complete the “HUMIDIFIRST MIST PAC START-UP FORM”.  There will be no 
warranty of the equipment without the form being completed and returned to Humidifirst.  
This warranty does not include labor.  The warranty is for parts only.  Spare parts are 
under warranty for 60 days from the date of shipment.  Humidifier modules controlled by 
non-Humidifirst control boxes carry no warranty. 
 
Manual Disclaimer 
 
Humidifirst has made every effort to assure accuracy in the manual, and assumes no 
responsibility and disclaims all liability for damages resulting from the use of this 
information or for any errors or omissions.  
 

Summary of Contents for MIST-PAC SERIES
























Reviews: