Humbaur 3000 Series, Operating Instructions Manual

Page: 91 / 106

7
Bearing of the loading bridge
89
MACHT’S MÖGLICH
Testing, care and maintenance
Bearing of the loading bridge
Fig. 14 Rear bearing points
1 Screw connection
2 Bearing bracket
3 Loading bridge

Tip and secure the loading bridge (Fig. 14 /3).
 Check the screw connections (Fig. 14 /1) on the bearing
brackets (Fig. 14 /2) of the loading bridge.
 Remove any possible contamination.

Tighten the screw connections if necessary.
 Lubricate the rear bearing points.
Fig. 15 Front bearing points
1 U-bracket
2 Rubber pad
 Check the U-bracket (Fig. 15 /1) and rubber pad for
deformation (Fig. 15 /2).
Fig. 16 Lower the loading bridge onto the chassis
1 Loading bridge
2 Front bearing point / U-bracket
 Tilt the loading bridge / cargo bed (Fig. 16 /1) back
- see “Manual pump - Tilting back the cargo bed” on page
33,
- see “Electro-hydraulic equipment - Tilting back the
cargo bed” on page 38
- see “Towing connection - Tilting the cargo bed back” on
page 43.
W - 011
1 2
3
W - 012
1
2
W - 013
1
2