Humbaur 3000 Series, Operating Instructions Manual

Page: 84 / 106

7
Safety inspection
82
MACHT’S MÖGLICH
Testing, care and maintenance
Trailers must be inspected by a competent / qualified
specialist for their condition for safe operation as and when
required, but at least once a year.
This also applies to all components which are used for the
load securing according to VDI 2700 or / and EN 12642.
All important mechanical components must be inspected
and maintained at regular intervals for safety reasons.
These include:
– Axles
– Brakes
– Bolts
– Attachments
– Switch-off and securing mechanisms
– Electrical system / Electro-hydraulic equipment
Note:
– Comply with the accident prevention regulations
for all maintenance work.
– Comply with the environmental protection
guidelines.
– Switch off the engine of the towing vehicle prior
to starting maintenance work.
– Ensure that the electro-hydraulic equipment has
been switched off.
– Damaged tie-down points may not be repaired
on any account, but must be exchanged for new
parts.
– Damaged and non-functioning trailer parts must
be exchanged for original spare parts of
Humbaur GmbH.
Note the maintenance regulations in the operating
instruction manual “Trailers up to 3.5 to / General –
Part 1”.
Certain maintenance work may only be carried out
by trained and qualified personnel.
The prescribed maintenance intervals must be
complied with.