Humbaur 3000 Series, Operating Instructions Manual

Page: 48 / 106

4
Spare wheel holder (option)
46
MACHT’S MÖGLICH
Operating the chassis
Spare wheel holder
Fig. 43 Spare wheel holder, from the inside
1 Spare wheel holder
2 Mounting bolts
3 Front drop side
A spare wheel holder (Fig. 43 /1) is available as an option.
The spare wheel holder may only be used to attach and
carry a spare wheel (Fig. 44 /3).
The spare wheel holder is mounted on the front drop side
(Fig. 43 /3).
No additional holes may be made in the chassis /
V drawbar for attachment of the spare wheel
holder.
The spare wheel holder / spare wheel may not be
used for load securing.
A spare wheel may only be retrofitted at the provided
attachment points.
Screwing the spare wheel into place
Fig. 44 Spare wheel holder with spare wheel
1 Spare wheel holder with wheel bolts
2 Spherical collar nut
3 Spare wheel
NOTICE
Tightening up spare wheel nuts too tightly
The wheel rim could be deformed.

Tighten the spare wheel nuts to a maximum of 80 Nm.

Before driving off, make sure that the max. drawbar load
is not exceeded.
 Carefully place the spare wheel on the wheel bolts of the
spare wheel holder (Fig. 44 /1).

Screw the wheel on tightly with the spherical collar nuts
(Fig. 44 /2).
 Do not exceed a tightening torque of 80 Nm.

Check the air pressure of the spare wheel at regular
intervals.
 Check the secure attachment of the spare wheel at
regular intervals.
The spare wheel, spare wheel holder and securing
elements must be properly secured against loss.
Spare wheels transported loose (on the cargo bed)
must be securely tied down.
Carrying a spare wheel holder at the front of the
trailer increases the drawbar load.
F - 045
2
3
1
F - 046
2
1
3