34
Version 2019/01
Tandem HA, HN & HT Operating Instruction Manual (Part 2)
Positioning
1
2
Drive-up ramps positioned
1. Locking strap
2. Gap between chassis and rear drop side
►
►
Lift the drive-up ramp with both hands.
►
►
Place the drive-up ramp on the cargo bed so that the
locking strap is inserted into the gap between chassis and
rear drop side.
Setting the track width
WARNING
Drive-up ramps positioned to incorrect
track width!
The vehicle to be loaded may fall from the drive-
up ramps – risk of impact/crushing!
►
►
Position the drive-up ramps at the correct track width
before loading/unloading.
Setting the track width
►
►
Adjust the drive-up ramps to the track width of the vehi-
cle to be loaded.
►
►
Align the vehicle straight (at a 90° angle) to the trailer/to
the drive-up ramps.
►
►
Centre the track.
Drive-up ramps positioned
Driving up
It is only permitted to drive up the drive-up ramps if the
driver can see the wheels directly.
If the wheels cannot be seen directly, the drive-up ramps
may only be used under the supervision of an assistant.
Avoid abrupt stopping and re-starting.
Example of using the drive-up ramps
►
►
Drive up the drive-up ramps slowly and carefully – at a
max. speed of 0.3 km/second.
Stepping on the drive-up ramps
CAUTION
Stepping on the drive-up ramps!
The drive-up ramps may be dirty and wet.
You may slip – risk of falling!
►
►
Use
.
►
►
Walk on the drive-up ramps carefully and slowly.