Humbaur 1374.610 Operating Instructions Manual Download

Page: 29 / 56

Operating Instruction Manual

V 2019/01

29/56

Operating the tailgate

Opening the tailgate

H - 56

Tailgate folded down

1. Tailgate

►

Unlock the latches on both sides.

►

Hold the tailgate (1) with one hand.

►

Carefully fold down the tailgate.

Closing the tailgate

H - 57

Folding the tailgate shut

►

Fold up the tailgate - keep your hands away from the

closing edges.

►

Close the latches one by one.

Removing the tailgate

Sliding out the tailgate

H - 58

Removing the tailgate

1. Hinge on the tailgate
2. Hinge on the chassis

►

Unlock the latches on the tailgate.

►

Fold the tailgate to a horizontal position.

►

Slide the tailgate sidewards in the direction that is now

unobstructed.

H - 59

Tailgate removed

►

Put the detached tailgate somewhere where it is safe

from damage.

►

Close the latches.

Fitting the tailgate

Inserting the tailgate

H - 60

Fitting the tailgate

1. Hinge
2. Tailgate

►

Slide the tailgate (2) sidewards into the hinge (1).

H - 61

Tailgate fitted and secured (driving position)

►

Fold up the tailgate.

►

Lock the latches on the tailgate.

Summary of Contents for 1374.610

























































Search results

Summary of Contents for 1374.610

Reviews:

Related manuals for 1374.610

Brands by name

Popular brands

Humbaur 1374.610, Operating Instructions Manual

Search results

Summary of Contents for 1374.610

Reviews:

Related manuals for 1374.610

Brands by name

Popular brands