Humbaur 1374.610 Operating Instructions Manual Download

Page: 33 / 56

Operating Instruction Manual

V 2019/01

33/56

8.4 Bicycle stand on aluminium cover

Functional explanation

•

Two pre-assembled crossbars (max. load 60 kg)

•

Possible to mount 1 to 3 bicycle stands

•

Safe transportation of bicycles

WARNING

Overloading the bicycle stand!

The bicycle stand could break and the bicycle could fall off - risk

of accident!

►

Observe the maximum load capacity - see label.

CAUTION

Opening the aluminium cover with a load on top!

The gas struts cannot support an additional load - the alumini-

um cover may fall shut unexpectedly - risk of impact / crushing!

►

Remove the load, e.g. bicycle, before opening the

aluminium cover.

►

Before opening the aluminium cover, make sure that

there are no unsecured goods on top that can slide off.

NOTICE

Overloading of aluminium cover / crossbar!

The aluminium cover may be deformed. Crossbars can break.

►

Limit the weight on the crossbar to a maximum of 60 kg.

►

Distribute the load evenly across the crossbars.

H - 76

1030 mm

Example: Mounted bicycle stand

1. Lateral crossbar
2. Bicycle stand / stand

Transporting a maximum of 3 bicycles only permitted

using a bicycle carrier!
Other goods such as long materials cannot be transport-
ed on crossbars - no tie-down options available!

Observe / read assembly instructions provided
by bicycle stand manufacturer.

H - 77

Example: Bicycle mounted / secured

1.  Bicycle
2.  Belt
3.  Adjustable support

►

Adjust the adjustable support (3) to fit the size of the

bicycle (1).

►

Lift the bicycle onto the bicycle stand. If necessary, use

steps or ladder.

►

Secure the bicycle frame with the bracket support.

►

Screw the rotary handles tight.

►

Lock the rotary handle - as anti-theft device.

►

Secure both tyres with a belt (2).

Summary of Contents for 1374.610

























































Search results

Summary of Contents for 1374.610

Reviews:

Related manuals for 1374.610

Brands by name

Popular brands

Humbaur 1374.610, Operating Instructions Manual

Search results

Summary of Contents for 1374.610

Reviews:

Related manuals for 1374.610

Brands by name

Popular brands