Humbaur 1374.610 Operating Instructions Manual Download Page 45

Page: 45 / 56

Operating Instruction Manual

V 2019/01

45/56

11.5 Lubricant / oil

►

To lubricate / grease the trailer components, only used

the listed lubricants.

•

Type of lubricant:

Multi-purpose grease according to ISO-L-XCCHB3

or DIN 51825 type K with application range:

-30 °C to + 120 °C.

•

Oil: commercially available machine oil.

►

If necessary, use hand care products or gloves to

protect the hands / skin.

►

After lubricating trailer components, wash your

hands thoroughly with water / hand cleaner.

•

The lubrication intervals must be adapted according to

the intensity of use and degree of contamination.

►

Wipe off any excess oil with a rag after performing lubrica-

tion work – environmental protection.

WARNING

System failure due to incorrect lubrication

There are some component which must not be lubricated /
greased under any circumstances. The components could then fail
to work - risk of accident!

►

Find out which components must not be lubricated, for

example: Friction linings of ASK safety coupling, clamping

tube on prop stand, thread on wheel bolt, brake pads, etc.

11.6 Coupling head

Cleaning

H - 101

Coupling head (viewed from below)

1.  Safety indicator / mechanics
2.  Spherical cup
3.  Coupling cup
4.  Spring mechanism

Foreign objects can prevent the coupling head from
engaging!

►

Clean the coupling head on the inside as well.

►

Wipe the spherical cup / coupling cup with a cloth.

►

Remove foreign objects such as blades of grass, leaves or

small twigs.

►

Check the spherical cup and the coupling cup for wear.

►

Replace the coupling head if severely worn.

Lubricating / oiling

H - 102

Coupling head

Lubrication / oiling points

1. Oiling points (bearing points)
2. Lubrication points (spherical cup)

Spherical cup, joints and coupling cup bearing points
must be lubricated / oiled regularly.

►

Apply multi-purpose grease to the spherical cup / cou

pling cup from below.

►

Drip some standard machine oil onto the bearings and

joint areas.

Summary of Contents for 1374.610

























































Search results

Summary of Contents for 1374.610

Reviews:

Related manuals for 1374.610

Brands by name

Popular brands

Humbaur 1374.610, Operating Instructions Manual

Search results

Summary of Contents for 1374.610

Reviews:

Related manuals for 1374.610

Brands by name

Popular brands