manualshive.com logo in svg

Humanscale QuickStand Under Desk, Installation Instructions Manual

Share
Download
Humanscale QuickStand Under Desk Installation Instructions Manual Download Page 7

7

STEP 12 (FOR SINGLE / DUAL MONITOR)

Adjust Monitor Height

• 

Remove the cap on the top of the monitor stand  

and adjust monitor height using a 6mm allen wrench.

• 

Set the height of the monitor so the top of the  

screen comes to the user's eye level.

STEP 13 (FOR SINGLE / DUAL MONITOR)

Adjusting the Counterbalance

• 

Using a 3mm hex tool, turn the adjuster screw  

to adjust the counterbalance system.

NOTE -  DO NOT USE POWER TOOL AS IT  

MAY DAMAGE THE PRODUCT 

 

Suggestion on the adjustment.

 

Min: 5lbs monitor

 

Mid: 20lbs monitor

 

Max: 30lbs monitor

Step 12

Remove the cap on the top of the monitor stand and adjust 
monitor height using a 6mm allen wrench.
Set the height of the monitor so the top of the screen comes 
to the users eye level. 

Step 13

Using a 6mm hex tool, turn the adjuster screw to adjust the counter balance 
system.  

Suggestion on the adjustment.
Min: 5lbs monitor 
Mid: 20lbs monitor 
Max: 30lbs monitor

Step 12

Remove the cap on the top of the monitor stand and adjust 
monitor height using a 6mm allen wrench.
Set the height of the monitor so the top of the screen comes 
to the users eye level. 

Step 13

Using a 6mm hex tool, turn the adjuster screw to adjust the counter balance 
system.  

Suggestion on the adjustment.
Min: 5lbs monitor 
Mid: 20lbs monitor 
Max: 30lbs monitor

Step 12

Remove the cap on the top of the monitor stand and adjust 
monitor height using a 6mm allen wrench.
Set the height of the monitor so the top of the screen comes 
to the users eye level. 

Step 13

Using a 6mm hex tool, turn the adjuster screw to adjust the counter balance 
system.  

Suggestion on the adjustment.
Min: 5lbs monitor 
Mid: 20lbs monitor 
Max: 30lbs monitor

Summary of Contents for QuickStand Under Desk













Reviews:

No comments

Brands by name

Popular brands

Load more brands