manualshive.com logo in svg

Humanscale QuickStand Under Desk, Installation Instructions Manual

Share
Download
Humanscale QuickStand Under Desk Installation Instructions Manual Download Page 5

5

STEP 7 (FOR SINGLE / DUAL MONITOR)

Install Keyboard Tray

• 

The front edge of the keyboard tray must  

be at the front edge of the table.

• 

Loosen the 6 acorn nuts in Step 3 to rotate  

the unit for adjustment if needed.

STEP 8 (FOR SINGLE / DUAL MONITOR)

Attach VESA Plate

• 

Attach the VESA plate to your monitor and install  

monitor on monitor mount.

• 

For dual monitor, please refer to the  

crossbar installation manual.

STEP 9A (FOR SINGLE / DUAL MONITOR)

Cable Installation

• 

Leave enough cable slack for the monitors to adjust up and down  

and secure with cable clips. Push the clip to one side to remove.

• 

Run the cable down the channel of the column and through  

the grommet.  

 

*Recommended to adjust cable slack putting the monitor at its  

heighest adjustment position.  

 

*Keeping the cables organized and lined up in the channel  

will help the installation of the cable cover.

Step 7

Next install keyboard tray.
Front edge of the keyboard tray must be at the front edge of the table.
Losen the 6 acorn nuts in step3 to rotate the unit for adjustment if needed.

Step 8

Attach the Vesa plate to your monitor and Install monitor on monitor mount.
For dual monitor, please refer to the crossbar installation manual.

Step 7

Next install keyboard tray.
Front edge of the keyboard tray must be at the front edge of the table.
Losen the 6 acorn nuts in step3 to rotate the unit for adjustment if needed.

Step 8

Attach the Vesa plate to your monitor and Install monitor on monitor mount.
For dual monitor, please refer to the crossbar installation manual.

Step 9a

For wired keyboard and mouse, break away the tab in the front of the cover 
and run the cable through the channel and secure with cable cover. Follow 
the rest of the cables down the colomn.

Step 9

Leave enough cable slack for the monitors to adjust up&down and secure 
with cable  clips. Push the clip to one side to remove.  
Run down the channel of the column and through the grommet.

* Reccomended to adjust cable slack putting the monitor at its heighest adjustment position.

* keeping the cables organized and lined up in the channel will help the installation of the 

cable cover. 

Summary of Contents for QuickStand Under Desk













Reviews:

No comments

Brands by name

Popular brands

Load more brands