manualshive.com logo in svg

Humanscale QuickStand Under Desk, Installation Instructions Manual

Share
Download
Humanscale QuickStand Under Desk Installation Instructions Manual Download Page 10

10

STEP 10 (FOR M2, M8 OR M / FLEX)

Attach Monitor

• 

Attach the VESA plate to your monitor  

and install monitor on monitor arm.

STEP 11 (FOR M2, M8 OR M / FLEX)

Snap All Cable Covers in Place.

Step 8

Keyboard tray at its highest position, route all cables through the cable 
holder as shown here and exit the cables to the side closer to the power and 
CPU. There should be no cable slack. Lock the cables in position with the 
cable cover.
*When using USB cables, bundle all cables in 4 areas shown in the image.

Step 9

Attach the Vesa plate to your monitor and Install monitor on monitor arm.

STEP 12 (FOR M2, M8 OR M / FLEX)

Adjusting the Counterbalance

• 

Using a 3mm hex tool, turn the adjuster screw  

to adjust the counterbalance system.

NOTE -  DO NOT USE POWER TOOL AS IT  

MAY DAMAGE THE PRODUCT 

 

 

Suggestion on the adjustment.

 

Min: 5lbs monitor

 

Mid: 20lbs monitor

 

Max: 30lbs monitor

Step 10

Snap cable covers in place. 

1.

2.

1.

2.

Click

Click

Step 11

Using a 6mm hex tool, turn the adjuster screw to adjust the counter balance 
system.  

Suggestion on the adjustment.
Min: 5lbs monitor 
Mid: 20lbs monitor 
Max: 30lbs monitor

Step 12

Remove the cap on the top of the monitor stand and adjust 
monitor height using a 6mm allen wrench.
Set the height of the monitor so the top of the screen comes 
to the users eye level. 

Step 13

Using a 6mm hex tool, turn the adjuster screw to adjust the counter balance 
system.  

Suggestion on the adjustment.
Min: 5lbs monitor 
Mid: 20lbs monitor 
Max: 30lbs monitor

Step 10

Snap cable covers in place. 

1.

2.

1.

2.

Click

Click

Step 11

Using a 6mm hex tool, turn the adjuster screw to adjust the counter balance 
system.  

Suggestion on the adjustment.
Min: 5lbs monitor 
Mid: 20lbs monitor 
Max: 30lbs monitor

Step 10

Snap cable covers in place. 

1.

2.

1.

2.

Click

Click

Step 11

Using a 6mm hex tool, turn the adjuster screw to adjust the counter balance 
system.  

Suggestion on the adjustment.
Min: 5lbs monitor 
Mid: 20lbs monitor 
Max: 30lbs monitor

Step 10

Snap cable covers in place. 

1.

2.

1.

2.

Click

Click

Step 11

Using a 6mm hex tool, turn the adjuster screw to adjust the counter balance 
system.  

Suggestion on the adjustment.
Min: 5lbs monitor 
Mid: 20lbs monitor 
Max: 30lbs monitor

Step 10

Snap cable covers in place. 

1.

2.

1.

2.

Click

Click

Step 11

Using a 6mm hex tool, turn the adjuster screw to adjust the counter balance 
system.  

Suggestion on the adjustment.
Min: 5lbs monitor 
Mid: 20lbs monitor 
Max: 30lbs monitor

Step 10

Snap cable covers in place. 

1.

2.

1.

2.

Click

Click

Step 11

Using a 6mm hex tool, turn the adjuster screw to adjust the counter balance 
system.  

Suggestion on the adjustment.
Min: 5lbs monitor 
Mid: 20lbs monitor 
Max: 30lbs monitor

Summary of Contents for QuickStand Under Desk













Reviews:

No comments

Brands by name

Popular brands

Load more brands